Non-Destructive Testing (NDT) Systems | Magnetic Particle Inspection https://www.uniquegroup.com/product-category/survey-equipment/inspection-repair-and-maintenance/non-destructive-testing-ndt/ Subsea, Offshore and Life Support Solutions Thu, 08 Aug 2024 08:38:23 +0000 en-US hourly 1 https://wordpress.org/?v=6.3 https://www.uniquegroup.com/wp-content/uploads/2022/06/cropped-favicon-32x32.png Non-Destructive Testing (NDT) Systems | Magnetic Particle Inspection https://www.uniquegroup.com/product-category/survey-equipment/inspection-repair-and-maintenance/non-destructive-testing-ndt/ 32 32 Buckleys: Wet Roof Pro2 Flat Roof Leak Detector Kit https://www.uniquegroup.com/product/buckleys-wet-roof-pro2-flat-roof-detector-kit/ Thu, 08 Aug 2024 08:28:38 +0000 https://www.uniquegroup.com/?post_type=product&p=11486 The Wet Roof Pro’ has been designed to locate leaks on flat roofing systems which incorporate dielectric membrane overlays such as single-ply, asphalt, bitumen and liquid applied roofs.

It uses the 'vector-mapping' or 'earth leakage' method of locating faults. The conductive properties of water (from either rainfall or a hose) provide a medium through which electrical current can flow, allowing the user to pinpoint leaks. The kit comprises two main elements; a generator unit and a detector unit. The generator unit creates an electrical field across the roof surface via a ‘boundary wire’ which is positioned around the perimeter of the test area and connected to the negative terminal on the generator unit. The positive terminal is connected to a suitable earth on the building’s structure.

Leaks in the roof membrane allow water to penetrate to the building’s structure; creating a short circuit. The detector unit is connected to two hand-held test probes which are held in contact with the roof surface.

By measuring the voltage differential between the test probes, the detector unit is able to direct the operator to the location of the leak.

The post Buckleys: Wet Roof Pro2 Flat Roof Leak Detector Kit appeared first on Unique Group.

]]>
Easy to set up and use

Lightweight

Microprocessor controlled

Selectable audible alarm

Clear backlit LCD displays

The post Buckleys: Wet Roof Pro2 Flat Roof Leak Detector Kit appeared first on Unique Group.

]]>
Buckleys: Lab Pro2 – Pinhole detector (mains operated) 40kV https://www.uniquegroup.com/product/buckleys-lab-pro2-pinhole-holiday-detector/ Fri, 14 Jun 2024 08:28:58 +0000 https://www.uniquegroup.com/?post_type=product&p=11328 The Lab Pro2 is a precision Pinhole detector that is mains powered. This can be used in industries such as hipot testing for the inspection and testing of electrical insulation and for verifying that shielded items within an assembly are sufficiently protected.

The Lab Pro2 is available with a convenient folding desk stand/handle and the wide range of accessories and electrodes available enables the user to tailor the Lab Pro2 to a host of test requirements. The Lab Pro2 is the result of an exhaustive research, development and design programme; bringing the latest technology to the instrument along with an all-new user interface and a large multi-color display. Navigating the menus and settings is simple and the Lab Pro2 is the safest and most accurate instrument Buckleys have made to date. Mains powered; the Lab Pro2’s built-in switch mode power supply and high-voltage generation system ensures the DC output voltage remains stable and accurate while its precision sensitivity control gives the user confidence in the result of every test.

The post Buckleys: Lab Pro2 – Pinhole detector (mains operated) 40kV appeared first on Unique Group.

]]>
Compact and portable

Simple to use

Mains powered

Multicolour display

Menu available in EN, FR, DE, ES, IT, PT, PI, TR, RU, NL

The post Buckleys: Lab Pro2 – Pinhole detector (mains operated) 40kV appeared first on Unique Group.

]]>
Buckleys: BathyCorrometer® Pro’ Mk7 with long reach flexible probes https://www.uniquegroup.com/product/buckleys-bathycorrometer-pro-mk7-with-long-reach-flexible-probes/ Wed, 05 Jun 2024 06:59:21 +0000 https://www.uniquegroup.com/?post_type=product&p=11272 The BathyCorrometer® Pro’Mk7 is the latest generation of the tried-and-tested, industry-standard BathyCorrometer® which has provided reliable service for subsea corrosion surveys since 1971.

Renowned for its rugged, dependable construction; the BathyCorrometer® has built a reputation for reliability and its ability to handle harsh environments whilst taking accurate measurements. The latest version of the industry-standard BathyCorrometer® brings a host of developments, designed to make measurement simpler than ever and enhance the BathyCorrometer’s reliability even further. Kit includes:

  • Buckleys BathyCorrometer® Pro’ Mk7
  • 3 x Flexible long reach BathyCorrometer® Pro’ probes
  • CalChecker Pro’ with calibration lead
  • 3 x K-SAT Reference Electrodes
  • Battery charger
  • 6 x hardened stainless steel probe tips
  • Probe tip spanner
  • 19mm open-ended spanner
  • Silicone grease
  • Zinc test block
  • Flexible lanyard with carabiner connection
  • Seawater test mixture
  • All contained in fitted carrying case with instruction manual

The post Buckleys: BathyCorrometer® Pro’ Mk7 with long reach flexible probes appeared first on Unique Group.

]]>
High visibility LCD display for improved clarity.

Latest surface technology electronics.

Depth of operation: up to 350 metres.

Facility for remote monitoring via Surface Display Unit Pro’.

Proven, rugged construction.

The post Buckleys: BathyCorrometer® Pro’ Mk7 with long reach flexible probes appeared first on Unique Group.

]]>
Buckleys: UCP1B Proximity CP Probe https://www.uniquegroup.com/product/buckleys-ucp1b-proximity-cp-probe/ Mon, 29 Aug 2022 05:15:01 +0000 https://www.uniquegroup.com/product/buckleys-ucp1b-proximity-cp-probe/ The UCP1B proximity probe is a lightweight and versatile instrument specifically designed to carry out underwater cathodic protection potential measurements.

The probe has been developed for use with manned or Remotely Operated Vehicles (ROVs) and comes complete with 3 metres of cable. Each probe is supplied with a Certificate of Inspection and Conformity. By placing the UCP1B in close proximity to the surface under test, a voltage reading can be obtained on a suitable high impedance or digital voltmeter. The meter should be connected between the probe and a separate structure negative return.

The UCP1B is extensively used in a wide range of applications including production and drilling platforms, ships’ hulls, jetties and other marine works.

The post Buckleys: UCP1B Proximity CP Probe appeared first on Unique Group.

]]>
Hard wearing DELRIN body

Half Cell can be replaced

Lightweight design

Easy to use

Suitable for fitting to manipulator arm

The post Buckleys: UCP1B Proximity CP Probe appeared first on Unique Group.

]]>
Buckleys: UCP1A Contact CP Probe & Calibration Kit https://www.uniquegroup.com/product/buckleys-ucp1a-contact-cp-probe-calibration-kit/ Mon, 29 Aug 2022 05:15:00 +0000 https://www.uniquegroup.com/product/buckleys-ucp1a-contact-cp-probe-calibration-kit/ The UCP1A has been specially designed for use with manned or Remotely Operated Vehicles (ROVs) and comes complete with 3 metres of underwater cable.

When the stainless steel probe tip of the UCP1A makes contact with the surface under test, the resulting voltage can be read on a suitable high impedance or digital voltmeter.

The UCP1A is extensively used in a wide range of applications including production and drilling platforms, ships’ hulls, jetties and other marine works.

The Calibration Kit has been created to provide all the necessary components to enable customers to verify the accuracy of the readings on the Buckleys Contact and Proximity Probes so that ‘in-house’ verification certificates can be issued. The kit also comes complete with a comprehensive instruction manual and certificate of inspection and conformity, all contained in a durable carrying case. Kit contents:

  • UCP1A Contact Probe
  • 3 x Screw-on K-SAT Reference Cells
  • 3 x Adaptor Leads
  • Sea Water Corrosion Test Mixture (500g)
  • Zinc Test Block

The post Buckleys: UCP1A Contact CP Probe & Calibration Kit appeared first on Unique Group.

]]>
Hard-wearing DELRIN body.

Stainless steel probe tip.

Lightweight design & easy to use.

Suitable for gripping in manipulator arm.

The post Buckleys: UCP1A Contact CP Probe & Calibration Kit appeared first on Unique Group.

]]>
Buckleys: UCP1A Contact CP Probe https://www.uniquegroup.com/product/buckleys-ucp1a-contact-cp-probe/ Mon, 29 Aug 2022 05:14:59 +0000 https://www.uniquegroup.com/product/buckleys-ucp1a-contact-cp-probe/ The UCP1A contact probe is a lightweight and versatile instrument that provides a means of carrying out underwater cathodic protection potential measurements.

It has been specially designed for use with manned or Remotely Operated Vehicles (ROVs) and comes complete with 3 metres of underwater cable. Each probe is supplied with a Certificate of Inspection and Conformity. When the stainless steel probe tip of the UCP1A makes contact with the surface under test, the resulting voltage can be read on a suitable high impedance or digital voltmeter.

The UCP1A is extensively used in a wide range of applications including production and drilling platforms, ships’ hulls, jetties and other marine works.

The post Buckleys: UCP1A Contact CP Probe appeared first on Unique Group.

]]>
Hard-wearing

DELRIN body

Stainless steel probe tip

Lightweight design

Easy to use

Suitable for gripping in manipulator arm

The post Buckleys: UCP1A Contact CP Probe appeared first on Unique Group.

]]>
Buckleys: Surface Display Pro’ https://www.uniquegroup.com/product/buckleys-surface-display-pro/ Mon, 29 Aug 2022 05:14:58 +0000 https://www.uniquegroup.com/product/buckleys-surface-display-pro/ The Surface Display Pro’ has been designed to provide a remote method of displaying the structure to electrolyte readings obtained from the BathyCorrometer® Pro’ on the surface.

The Surface Display Pro’ (which would typically be on board a ship or on a platform) connects to the BathyCorrometer® (being used underwater by a diver) via a robust, two core water resistant cable of suitable length (supplied separately). Using a 4-20mA signal, the structure to electrolyte potential value shown on the kit is mirrored on the Surface Display Unit, allowing for quick and easy verification of the structure potential.

It is recommended that the Surface Display Unit (SDU) is purchased with the BathyCorrometer® it is going to be used with, this allows both units to be checked working together. The kit comprises:

  • Surface Display Pro’ unit
  • Mains supply lead
  • Calibration leads from BCM to SDU
  • Full instruction manual

The post Buckleys: Surface Display Pro’ appeared first on Unique Group.

]]>
Compact contemporary design and rugged construction

Precision internal reference

Accuracy of 0.05% of reading

Multi-position carrying handle/stand

Supplied with Calibration Certificate

The post Buckleys: Surface Display Pro’ appeared first on Unique Group.

]]>
Buckleys: Marine Survey Kit with 75m Cable & Multimeter https://www.uniquegroup.com/product/buckleys-marine-survey-kit-with-75m-cable-multimeter/ Mon, 29 Aug 2022 05:14:57 +0000 https://www.uniquegroup.com/product/buckleys-marine-survey-kit-with-75m-cable-multimeter/ The Marine Survey Kit comprises a Weighted Silver/Silver Chloride Half Cell, plastic cable spool and an accurate multimeter.

The kit has been specially created to include all items required to easily carry out a corrosion survey of marine structures. The half cell is housed in a PVC body with holes to allow the easy flow of water around the cell. The half cell is weighted to help keep it in position. The cell is connected to the cable spool by 75m of CSP 55/015 cable. Two other leads are supplied to connect the spool and the structure to the accurate multimeter.

In use the multimeter is connected to the structure (+ terminal) and the cable spool ( - terminal). The Half Cell is then lowered into the sea at the desired position. Turning on the multimeter to the DC voltage range will display the corrosion voltage.

The kit can be tailored to suit specific customer’s requirements. It comprises:

  • Weighted silver/silver chloride half cell
  • 75m cable
  • Two leads for connecting with spool and multimeter
  • Cable spool
  • Multimeter

The post Buckleys: Marine Survey Kit with 75m Cable & Multimeter appeared first on Unique Group.

]]>
75m cable length

Inert PVC body casing

Lightweight

Long service life

Supplied with Certificate of Inspection and Conformity

The post Buckleys: Marine Survey Kit with 75m Cable & Multimeter appeared first on Unique Group.

]]>
Buckleys: Marine Reference Cell Silver/Silver Chloride with 12.5m Cable https://www.uniquegroup.com/product/buckleys-marine-reference-cell-silver-silver-chloride-with-12-5m-cable/ Mon, 29 Aug 2022 05:14:56 +0000 https://www.uniquegroup.com/product/buckleys-marine-reference-cell-silver-silver-chloride-with-12-5m-cable/ The Marine Silver/Silver Chloride Half Cell is suitable for installation on surface structures such as jetties.

It has been specially designed to allow easy monitoring when connected to a separate high impedance voltmeter (greater than 10 meg Ohm). The electrode is housed in a PVC body with holes to allow the easy flow of water around the electrode. The Half Cell is supplied with 12.5 m of CSP 55/015 cable. Other cables lengths can be supplied, if required, further details on request.

The cell is long lasting and will give a service life of up to 5 years in ideal conditions.

The post Buckleys: Marine Reference Cell Silver/Silver Chloride with 12.5m Cable appeared first on Unique Group.

]]>
Long cable length

Inert PVC body casing

Lightweight

Long service life

The post Buckleys: Marine Reference Cell Silver/Silver Chloride with 12.5m Cable appeared first on Unique Group.

]]>
Buckleys: Saturated Glass Reference Cell https://www.uniquegroup.com/product/buckleys-saturated-glass-reference-cell/ Mon, 29 Aug 2022 05:14:54 +0000 https://www.uniquegroup.com/product/buckleys-glass-k-series-reference-cell/ The laboratory type Saturated Glass Reference Cell is an environmentally friendly & easily-maintained replacement for calomel cells and may be used to check and verify the accuracy of K-cells and installed Half Cells.

It has been designed to be connected to a separate high impedance voltmeter (greater than 10 meg Ohm) via a one metre lead. The electrode is housed in a high resistance glass body and comes with a salt bridge solution for topping up.

The reference electrode will give a service life of several years if used in laboratory conditions and stored correctly.

The post Buckleys: Saturated Glass Reference Cell appeared first on Unique Group.

]]>
Long cable length (1 metre)

Glass body casing

Environmentally friendly vs calomel electrodes

Refillable

Long service life

The post Buckleys: Saturated Glass Reference Cell appeared first on Unique Group.

]]>