Deepwater Corrosion Services | Inspection, Repair & Maintenance https://www.uniquegroup.com/product-category/survey-equipment/inspection-repair-and-maintenance/corrosion-services/ Subsea, Offshore and Life Support Solutions Tue, 16 May 2023 10:16:53 +0000 en-US hourly 1 https://wordpress.org/?v=6.3 https://www.uniquegroup.com/wp-content/uploads/2022/06/cropped-favicon-32x32.png Deepwater Corrosion Services | Inspection, Repair & Maintenance https://www.uniquegroup.com/product-category/survey-equipment/inspection-repair-and-maintenance/corrosion-services/ 32 32 Deepwater: I-Rod® Adhesive™ https://www.uniquegroup.com/product/deepwater-i-rod-adhesive/ Tue, 16 Aug 2022 13:02:06 +0000 https://www.uniquegroup.com/product/deepwater-i-rod-adhesive/ Unique Group offers I-Rod® Adhesive™ which provides a strong, permanent bond between I-Rod® strips and pipe supports. It is designed to securely anchor strips of I-Rod® in situations where drilling and bolting would be difficult.

The post Deepwater: I-Rod® Adhesive™ appeared first on Unique Group.

]]> It is a high-strength, two-component methacrylate adhesive designed to quickly bond I-Rod® thermoplastic materials to pipe supports without pretreating their clean surfaces.

Working time is around seven minutes at 22ºC, and full strength is achieved after 72 hours.

Comes with heavy-duty disposable nozzles for use with the required 1:1 mix ratio applicator gun.

The post Deepwater: I-Rod® Adhesive™ appeared first on Unique Group.

]]> Deepwater: I-Rod® Material https://www.uniquegroup.com/product/deepwater-i-rod-material/ Tue, 16 Aug 2022 13:02:03 +0000 https://www.uniquegroup.com/product/deepwater-i-rod-material/ I-Rod® material has high compressive strength and is subject to very little creep over time, so it can last up to 20 years in the field. The half-round I-Rod® material is supplied in lengths, or cut-and drilled to fit any size Pipe U-Bolt.

The post Deepwater: I-Rod® Material appeared first on Unique Group.

]]> High-strength thermoplastic rod.

The half-round shape allows moisture to evaporate, eliminating the crevice.

Provides an electrically isolated stand-off between pipe and supporting beam, allowing easy maintenance and inspection.

Provides excellent compressive strength and has a low friction coefficient.

Assists in pipe fitting when used as a beam dressing, and reduces coating damage during new construction.

The post Deepwater: I-Rod® Material appeared first on Unique Group.

]]> Deepwater: I-Rod® Clip https://www.uniquegroup.com/product/deepwater-i-rod-clip/ Tue, 16 Aug 2022 13:01:56 +0000 https://www.uniquegroup.com/product/deepwater-i-rod-clip/ Unique Group offers the I-Rod® Clip, which are made from the same I-Rod® that was originally developed for I-beam style supports. The I-Rod® Clip attaches to new or existing saddle clamp-style supports, eliminating crevice corrosion.

The post Deepwater: I-Rod® Clip appeared first on Unique Group.

]]> It has high compressive strength and is subject to very little creep over time.

Can last up to 20 years in the field.

The half-round shape allows moisture to evaporate, eliminating the crevice.

The post Deepwater: I-Rod® Clip appeared first on Unique Group.

]]> Deepwater: Retrobuoy™ https://www.uniquegroup.com/product/deepwater-retrobuoy/ Tue, 16 Aug 2022 13:01:51 +0000 https://www.uniquegroup.com/product/deepwater-retrobuoy/ Retrobuoy™ is a high-capacity impressed-current cathodic protection system, designed primarily as a retrofit for existing structures. It utilises impressed-current titanium-anode rods housed in buoyant floats. This configuration keeps the anodes in constant contact with seawater, maximising the efficiency of the cathodic protection.

The post Deepwater: Retrobuoy™ appeared first on Unique Group.

]]> Provides the lowest installed cost per ampere/year of any CP system available.

The compact size and remote location of the RetroBuoy™ on the seabed simplifies the installation procedure and increases the cost-effectiveness of the retrofit.

Mixed-metal-oxide-activated titanium electrodes allow the anode sled to be operated at a very high current output.

Routing the ICCP system cable can be done in a variety of ways depending on project needs.

The oil-filled, pressure-compensated electrical junction box that houses the electrode cables allows the system to operate efficiently at any depth.

The post Deepwater: Retrobuoy™ appeared first on Unique Group.

]]> Deepwater: Retrobuoy™ Junior https://www.uniquegroup.com/product/deepwater-retrobuoy-junior/ Tue, 16 Aug 2022 13:01:40 +0000 https://www.uniquegroup.com/product/deepwater-retrobuoy-junior/ A single float version of Retrobuoy™, the Retrobuoy™ Junior is a modular impressed-current anode array rated at 150 Amperes for 20 years in its standard configuration.

The post Deepwater: Retrobuoy™ Junior appeared first on Unique Group.

]]> The buoy’s three anodes are held within a buoyant module stabilised on the seafloor by a SeaMat gravity base.

Routing the ICCP system cable can be done in a variety of ways depending on project needs.

Mixed-metal-oxide-activated titanium electrodes allow the anode sled to be operated at a very high current output.

The FLXMAT base can be assembled locally in country to provide local content requirements.

The post Deepwater: Retrobuoy™ Junior appeared first on Unique Group.

]]>