connection, can be lifted via this point, can even be moored

onto.

Rental units inspected and tested between every single job.

Buoyancy of individual or multiple units can be increased or

decreased as required from the surface.

2 x 3/4 inch BSP standard inflation/deflation valves with 316

stainless steel male Camlock adapter as standard.

Leafield Marine high flow pressure relief valves (PRVs).

Delivered in an enclosed crate and ready for immediate use with

universally compliant documentation: MBU specific log book

containing certification, service records and operating manual.

The post UG: Mono Buoyancy Units (Enclosed) appeared first on Unique Group.

Integral handling ladders on units over 1 ton.

3/4 inch BSP standard inflation valve with 316 stainless steel Camlock end fitting standard on ALBs of 2 tons and above.

Base-operated high flow dump valve.

Industry-leading height to weight ratio: maximising load freeboard where required.

Design service available, to provide optimised solutions for specific tasks

The post UG: Salvage appeared first on Unique Group.

Flat-packed for efficient and cost-effective transport and storage.

Weighing less than 1% of its uplift capacity: e.g. 5t unit less than 50kg.

Quick to rig, and easy to vent for ultra-safe recovery.

Immediately available for rental or purchase from the world’s largest stock of such equipment.

If rented, then subject to the highest testing and re-certification standards in the industry.

The post UG: Draught Reduction Buoyancy appeared first on Unique Group.

Shore-side attendance to supervise the installation of hundreds of Seaflex buoyancy modules onto a pipeline prior to pull out to sea.

Presence on the client’s barge to brief the deck crew on the use of the Seaflex SeaSerpent, and supervision of its successful use for the pulling into shore of a cable.

The post UG: Onsite Support & Training appeared first on Unique Group.

Training of your own personnel to carry out factory-standard servicing of your bags

Travelling to your yard or project to carry our such servicing prior to and/or after use

The post UG: Asset Management appeared first on Unique Group.

Unique design features, for ease and speed of deployment and retrieval

Isolates a working area to avoid contamination of the wider environment

Tailored solution available post requirement assessment

ISO 9001-2009, ISO 14001 and ISO 18001 accreditations

The post UG: Silt Stoppers appeared first on Unique Group.

Coated with heavy duty UV stabilised PVC coating or, for special applications, polyurethane.

Assembled by skilled personnel using Radio Frequency welding to strict quality control standards.

ISO 9001-2009, ISO 14001 and ISO 18001 accreditations

Each buoy has an inflation valve commonly found in inflatable boats which allows inflation by most dinghy pumps; for the larger versions a small 12v blower or vacuum cleaner set to ‘blow’ saves a lot of time.

A stainless steel ring is fitted to the underside of the buoy with a similar fitting in the top for lifting or towing.

The post UG: SeaMark Racing Marks appeared first on Unique Group.

Excellent air retention and mechanical weld

strength.

Leafield C7 inflation and deflation valve

End fittings are M12 stainless steel eyes

Accredited with ISO 9001-2009, ISO 14001 & ISO 18001

The post UG: Low-pressure SeaStow Fenders appeared first on Unique Group.

Fitted with multiple pressure relief valves to ensure safety during use.

Unique end-strop design prevents stress and bulging on the extremities of the IBU.

Buoyancy of individual or multiple units can be increased or decreased as required from the surface.

Ideally suited to extreme shallow waters

The post UG: Inflatable Buoyancy Units appeared first on Unique Group.

7:1 design WLL factor on the strops.

Overall assembly tested and proven to a 5:1 minimum WLL safety factor.

Tested and proven inverter line attachment point.

High performance structural fabric canopy with RF welded seams.

The post UG: Air Lift Bags appeared first on Unique Group.